AC 110V Digital Temperature Controller Incubator Thermostat Fahrenheit 10A 2 Relays with Sensor
100 brand new and high quality
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Technical ParametersRemind no voltage output directly. Please use independent power supply for your heater or cooler
- KEEP TEMPERATURE IN DESIRED RANGE AND GUARANTEED ACCURACY:It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1F and maximum 25F.Fully utilize the stc microcontroller and NTC probe to have this controller has great accuracy(<1F).
- WIRRING HEATER AND COOLER AT THE SAME TIME:No more frequently change wirring between heater and cooler.This Incubator thermostat has 2 Relays.Compared with other 1 relay temperature controllers,you can wire 2 appliances (heater and cooler) at the same time on this temperature controller.It will automatically keep temperature in your set range.(SEPARATE POWER SOURCE NEEDED)
- OVER 40 IN WATERPROOF PROBE CORD FOR ENDLESS APPLICATION:The temperature controller is equipped with over 40'' inch waterproof probe can be used in moisture and water enviorment,you can use it in home brewing, aquarium,pet breeding,reptile tank,incubation,fermentation,seedling heat mat, accelerating germination.
- ABS PLASTIC SHELL AND COMPRESSOR DELAY PROTECT FUNCTION:Made of ABS heavy-duty and anti-flamming plastic shell,designed with compressor delay protection,alarm when temperature exceeds temperature limit.All these promise the best safty guarantee to this temperature controller.
- KETOTEK 1 YEAR GUARANTEE AND PROFESSIONAL ELECTRICAN SUPPORT:Every piece of our products is strictly inspected before sale.If you have any question please don't hesitate to contact use when you use it,we have profesional technicians to help you with any problems in using.All ketotek products include a 12-month warranty, we will try our best to meet your satisfaction.
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Inkbird All-Purpose Digital Temperature Controller Fahrenheit & Centigrade Thermostat w Sensor Cooling/Heating
Output: 2 Relays
Temperature Measuring Range: -50210F / -5099C
Resolution: 0.1F / 0.1C
Accuracy: 1F (-50160F) / 1 C (-5070C)
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC)
Ambient Temperature: 060C
Storage Temperature: -3075C
Relative Humidity: 2085 (No Condensate)
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size: 75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
1x ITC-1000 Temperature Controller 110v with 6.67 NTC Sensor
Q1: How to wire? I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals.
A1: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit.
Q2: The cooling device doesn't work, even though the temperature reaches TSDS, and the Cool indicator lamp is flashing.
A2: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.
- 🌟🌟Two Modes Have two relays. Switch between cooling and heating modes. Support F/C display.
- 🌟🌟Setting Value Control the temperature by setting the temperature set value and the difference value.
- 🌟🌟Different Functions Refrigerating control output delay protection, and temperature calibrating.
- 🌟🌟Alarm for Safe Alarm when temperature exceeds the limit or when sensor error.
- 🌟🌟Long Warranty Have warranty for one year.
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
If you choose heating mode, set control Value to 100F, set span value to 10F. The relay will be connected when temp drop to 90F. The relay will be disconnected when temp reaches 100F;
If you choose cooling mode, set control Value to 100F, set span value to 8F. The relay will be connected when temp reaches 108F. The relay will be disconnected when temp drops to 100F
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 220F
3.Temperature measure resolution: 1
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 - 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
1x Digital Temperature controller
- KEEP TEMPERATURE IN DESIRED RANGE: It's on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect. (12 Volt)
NOTE: The manual is the same with 110V manual. If the description on the unit is 12V, pls connect 12V device. Don't connect 110V Device. Thanks for your understanding.
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Output: 2 Relays
Temperature Measuring Range: -50210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: 1 oF-50 oF -160 oF/ 1 oC-50 oC -70 oC
Power Supply: 12V DC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VDC)/ Heating (10A/250VDC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85 (No Condensate)
1x ITC 1000 Temperature controller 12v
1 x 2M Sensor
- 12 Volt thermostat. 2 Relays, Switch Between Cooling and Heating Modes.
- Alarm When Temperature Exceeds the Limit or When Sensor Error.
- Control the Temperature by Setting the Temperature Set Value and the Difference Value.
- Temperature Calibrating, Refrigerating control output delay protection.
- Fahrenheit and Celsius Display Can Be Choose.
Icstation DC 12V Programmable Temperature Controller, Smart Home Incubator Aquarium Car Improvement Mini Digital Thermostat Regulator Switch Module Waterproof Sensor -58 to 230
Icstation mini digital programmable thermostat temperature controller with waterproof NTC (10k 0.5) temperature sensor probe and -50 to 110 (-58 to 230) measuring range. On-board 3 digit LED display the set temperature and current temperature with settable function. On-board DC 12V one channel relay control the power on/off, one key to switch the and temperature display ideal for DIY temperature control system use. Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment.
Measuring Range: -50 to 110 (-58 to 230)
Measuring Accuracy: 0.1
Controlling Accuracy: 0.1
Backlash Precision: 0.1
Refresh Frequency: 0.5s
High Temperature Protection: 0 to 110 (32-230)
Temperature Sensor Type: 10K0.5 NTC
Working Temperature: -10 to 60 (14 to 140)
Compatible Load: 5A/15A 220VAC, 20A 14VDC
Power Supply: DC12V 200mA
Power Consumption: 35mA (static), 65mA (relay close)
Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H)
Cable Length: 30cm/12inch, Probe: 2cm/0
1X Mini Digital Thermostat Temperature Controller Switch
1. Temperature setting: there are two button, STC() and C/F(-), press the STC then the LED will flash, press the STC C/F button to set the temperature you want, after reach the setting value, wait 3s, the module will automatically save the parameter and exit.
2. Indicator: turn on means the relay close
3. Display: LL means the sensor is in open circuit status; HH means the the temperature is exceed the module measuring range; --- means the module is in the high temperature protection status.
1, Download detailed English User Manual under the images or the Product Information
2, If you can not find it please send us a message, all customer's messages will be replaid in 12 hours as Technology Support.
- Celsius & Fahrenheit DisplayProgrammable mini digital temperature control unit with -50 to 110 (-58 to 230) measuring range
- Thermostat regulator switch module has dual LED display the set temperature and current temperature, with waterproof NTC (10K 0.5) temperature sensor probe, on-board tactile push button set the trigger temperature and alarming temperature
- 12V 1CH relay control the power on/off when the ambient temperature reach the set value, low power sumption <35mA (static), <65mA (relay close); Easy installing and setting in 30 minutes, splotting size 46 X 26.5mm/1.81 X 1.04inch (L*W)
- Power Supply: DC12V 200mA, Module Size: 48 X 29 X 32mm/1.89 X 1.14 X 1.26inch (L*W*H); Cable Length: 30cm/12inch, Probe: 2cm/0.8inch
- Widely used at smart home, industrial control, automatic irrigation, indoor ventilation and protection equipment. Such as temperature control of production workshop, car or automobile, hatching aquaculture, tobacco industry, printing house, aquarium, fish tank, heater, cooling equipment, bedroom and so forth
WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
The WH1436 temperature controller can turn on/off an electric appliances at desired temperature. For example, you can use the controller to turn on a heater at 99. 9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45. 3 F. (Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it. ) Main features: Plug and play. No worry about wiring. Maximum load: 1100 watts @110 volts Heating OR refrigeration working mode. Celsius or Fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature) Auto shut off timer(It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0. ) Specification: 1. Power supply: AC 110V 50/60Hz 2. Measure range: -58 230 F(-50 110 C) 3. Temperature resolution: 0. 1 4. Accuracy: 0. 5 5. Working mode: Heating OR Cooling mode 6. Slew range of temp controlling: 0. 1 - 230(difference between turn-on degree and turn-off degree) 7. Control resolution: 0. 1 8. Power consumption: less than 3W 9. Relay contact capacity: 10A 10. Store setting after power off: YES 11. pressor delay protection: YES 12. High and Low Temperature alarm: Yes 13. Product size: 4. 9x3. 6x1. 8 inch (12. 5x9. 1x4. 5 cm) 14. Sensor Cable length: 3m(9. 8ft) Advanced function: 1. Switch temperature unit(Default: F): F or C 2. Switch resolution(Default: 0. 1): 0. 1 or 1 3. Auto shut off timer(Default: OFF) Package Content: 1x WH1436A Temperature controller 1x sensor cable
- WE'VE IMPROVED THE CONTROLLER: simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now.
- KEEP TEMP IN DESIRED RANGE: Turn on your device at a set degree and turn it off at another set degree. The difference of the 2 degrees can be minimum 0.1 and maximum 288.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device you plug into the controller .
- MAX LOAD: 1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc . Total Outlet: 1
AC 110V-220V Fahrenheit/Centigrade Digital Temperature Controller Thermostat Heat/Cool Modes with Sensor 2 Relays
This digital temperature controller can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
Voltage: AC 110V220V (50Hz/60Hz)
Temperature Measuring Range:
Sensor Error Delay: 1 minute
Power Consumption: <3W
Sensor: NTC sensor
Relay Contact Capacity: Cool (10A/220VAC); Heat (10A/220VAC)
Ambient Temperature: 060
Storage Temperature: -3075
Ambient Relative Humidity: 2085(No condensate)
1 x Temperature Controller with Sensor
- Switch the modes between cool and heat.
- Control temperature by setting the temperature set value and the difference value.
- It supports temperature calibration function.
- Refrigerating control output delay protection. Widely used for aquariums, terrariums, zoos, paludarium, chicken incubator.
- Alarm when temperature exceeds temperature limit or when sensor error.
Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1100W With 6.65ft DC Cord NTC Stainless Probe Sensor for Aquarium, Incubator ect
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Temperature Control Range : -5099 C / -58210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 70C) / 1F (-50 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V 240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30 75 C / -22 167 F
Storage Temperature: -20 60 C / -4 140 F
Humidity 2085 (No Condensate)
Warranty: 1 Year
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
- Supports Centigrade or Fahrenheit unit display.
- The sensor can easily be replaced.
- Maximum output load: 1100W (120V).
- Alarm when over-temperature and sensor error.
- Dual display window, be able to display measured temperature and set temperature at the same time.
HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof
Dimensions: 48.5 * 40mm
Temperature Control mode: ON / OFF
Temperature Range :-50 - 110 degree centigrade
Resolution: When temperature is 0.1 degree, the resolution is -9.999.9, other temperature segment is 1 degree.
Control Accuracy: 0.1 degree
Hysteresis Accuracy: 0.1 degree
Refresh Rate: 0.5s
High Temperature Protection 0 - 110 degree centigrade
Supply Voltage: DC 12V
Static Current: Less than 35MA, attract current less than 65MA
Output Voltage: DC 12V
Output Power: 20A relay
Measurement Input: NTC (10K 0.5) Waterproof Sensor
Environmental Requirements: -10 - 60 degree centigrade; Humidity 20 - 85
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed,
press the "SET" button, press " or - " to set the desired temperature (long press " or - " to quickly increase or decrease),
press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF.
the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed.
Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm
Long press the "SET" button to enter the main menu settings,
press " or - " to switching between P0-P6,
then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.
2*W1209 12V DC Digital Temperature Controller Board
- 100 complete machine patch, wave soldering, stable performance, good consistency.
- Embedded CPU chip (MCU), more intelligent, lower power consumption.
- Automatic power set memory (MCU built-in EEPROM memory unit).
- Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
- Tips: - long press set to get menu, starts at P0 - press /- to get next P-parameter - press set to choose that parameter - press /- to select the value you want for that parameter - press set to accept it - long press /- = reset to default - power-out does reset to default - default temp set is 34.5C
KETOTEK Digital Temperature Controller -58230F AC 110V 220V 10A Thermostat Regulator Heating Cooling Control Relay Egg Incubator Farming
Mini temperature controller.
With large and clear LED display for better readability.
Wide temperature measuring range.
Heating and cooling control.
Temperature calibration function.
Delay protection function.
All parameters can be set to default setting after short circuit.
Working power supply: AC90250V10
Power consumption: 3W
Measurement range: -58230F
Difference set value: 0.154 F
Measurement precision: 0.1 F
Measurement error: 0.3 F
Control precision: 1 F
Working temperature:-86158 F
Temperature sensor: NTC 25 C=10K B3435
Front panel size: 75*35mm / 3*1.4in
Item weight: 93g / 3oz
Output Relay contact capacity: Max 10A/110Vac.
There is no voltage output directly. The function of output relay is equivalent to a switch! you need to use independent power supply for your heater or cooler!
In order to make sure the controller can work long time.We recommend to use heater or cooler with rated current less than 5A.
- Mini temperature controller with large and clear LED display
- Fahrenheit display with Measurement range: -58230F
- Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, boiler, steamer
- Can be used for industrial equipments and other temperature-controlled systems.
- Control the Temperature by Setting the Temperature Set Value and the Difference Value
- Klipsch reference r-10sw
- Tassimo nabob latte 16 t discs 8 espresso 8 milk
- Lens gasket toyota
- Kyb 565078 monomax gas shock
- Bell bicycle helmet adrenaline
- John home drawer